A slab leak is one of the more stressful plumbing problems a homeowner can face, because the pipe that is leaking is buried in the concrete slab under your house where you cannot see it or reach it easily. The good news is that it is fixable, and you do not have to jackhammer the whole floor to deal with it. CMD Plumbing handles slab leak detection and repair in Clinton, and we find the leak before we touch the concrete, then walk you through your options honestly.
Think you have a slab leak? Call (580) 330-0960.
What a Slab Leak Actually Is
Your home has water lines running through or under the concrete foundation slab. A slab leak is when one of those pipes springs a leak down there. People sometimes call it a foundation leak, which is close, the leak is under the foundation, though the pipe is the problem, not the concrete itself. Left alone, though, a slab leak can absolutely damage the foundation, the flooring, and the structure over time, which is why catching it early matters so much.
Signs You Might Have One
Slab leaks hide, but they usually leave clues. Watch for these:
- A warm or hot spot on the floor. If it is a hot water line leaking, part of your floor may feel warm underfoot.
- The sound of running water when everything is turned off.
- A water bill that jumped for no reason you can explain.
- Low water pressure that came on gradually.
- Cracks in the floor or walls, or flooring that is warping, buckling, or lifting.
- Damp or wet spots on the floor, or a musty, mildew smell with no obvious source.
Any one of these on its own might be something minor. Two or three together, or a mystery water bill plus the sound of running water, is worth a call before it gets worse.
How We Find the Leak Without Tearing Up Your Floor
The most important part of a slab leak job is locating the leak precisely, because the alternative is breaking up concrete and guessing. We do not guess. We use electronic leak detection, acoustic listening equipment, and pressure testing to pinpoint where the leak is before any concrete comes up. That means when we do open the slab, if that is the route you choose, it is a small, targeted spot over the actual leak, not a demolition project. Accurate detection is what keeps a slab leak repair from turning into a much bigger, more expensive job than it needs to be.
Your Repair Options
Once we know exactly where the leak is, there is usually more than one way to fix it, and the right one depends on the age of your plumbing, how many leaks there are, and your budget. We will lay out the real trade-offs instead of pushing you toward whatever is most profitable.
Spot repair. We open a small section of the slab directly over the leak and repair that piece of pipe. This is often the least expensive option when there is a single leak in otherwise sound plumbing. The downside is that older pipe that failed once may fail again elsewhere.
Reroute. Instead of digging back into the slab, we abandon the leaking line and run a new pipe above ground or through walls to bypass it. This avoids the concrete entirely for that line and is a strong option for a single leak where you would rather not disturb the slab.
Repipe. If your home has had multiple slab leaks or the plumbing is old and failing, replacing the affected lines is often the smarter long-term spend than chasing one leak after another. We will tell you honestly if you are at that point, and we will tell you if you are not.
The Insurance Question
A lot of homeowners want to know whether insurance covers this, and the honest answer is that it depends on your policy. As a general rule, many homeowners policies help with the cost of accessing the leak and repairing the resulting damage, even when they do not cover the leaking pipe itself, but coverage varies a lot from policy to policy. We are plumbers, not your insurance company, so we will not promise you what is covered. What we will do is document the leak, the detection, and the repair thoroughly so you have what you need if you decide to file a claim. Check your specific policy, and call your carrier early in the process.
Why Clinton Calls CMD Plumbing
We answer the phone and we communicate. A slab leak is stressful enough without chasing a plumber who will not call back. We tell you what we find, what your options are, and what we would do, in plain language.
A licensed, insured team. Head plumber Justin Lovell leads the crew, and every tech is licensed, insured, and background checked. For a job that involves your foundation, that standard matters.
Backed by a warranty. Our work comes with a one-year parts-and-labor warranty. If something is not right, we make it right.
Local, out of Clinton. We work out of 3800 W Commerce Rd, so we are close, and we are accountable to our neighbors here.
Don’t Wait on a Slab Leak
This is the one plumbing problem where waiting genuinely costs you. A slab leak does not stop on its own, and the longer it runs, the more it can damage your foundation, your floors, and your home, and the bigger the repair bill climbs. Catching it early is almost always the cheaper path. If you suspect one, the smart move is to get it looked at now.
Serving Clinton and Western Oklahoma
Clinton is our home base, so it is where we respond fastest. We also handle slab leak detection and repair across Western Oklahoma, including Elk City, Weatherford, Cordell, Thomas, and Arapaho. If your slab leak has turned into an active flood, that is an emergency, see our emergency plumber in Clinton page or just call, day or night. For related plumbing, we also cover water heater repair and drain cleaning in Clinton.
Suspect a slab leak? Call CMD Plumbing at (580) 330-0960.
Frequently Asked Questions
What are the first signs of a slab leak?
Common early signs are a warm spot on the floor, the sound of running water when everything is off, an unexplained jump in your water bill, gradually low water pressure, and damp spots or a musty smell. One sign alone may be minor, but several together are worth a call.
How do you find a slab leak without breaking the floor?
We use electronic leak detection, acoustic listening equipment, and pressure testing to pinpoint the leak before any concrete comes up. That way, if we do open the slab, it is a small targeted spot over the leak, not a demolition.
Should I repair the leak or reroute the pipe?
It depends. A spot repair is often cheapest for a single leak in otherwise sound plumbing. A reroute avoids the slab by running a new line around it. A full repipe makes sense if the plumbing is old or has leaked more than once. We lay out the trade-offs and let you decide.
Does homeowners insurance cover a slab leak?
It varies by policy. Many policies help with accessing the leak and repairing the resulting damage, even if not the pipe itself, but you should check your specific coverage and call your carrier. We document everything thoroughly to support a claim if you file one.
Is a slab leak an emergency?
If it is actively flooding or causing fast damage, yes, call right away. Even a slow slab leak should be handled promptly, because it only gets worse and more expensive the longer it runs.
How long does slab leak repair take?
Detection is usually quick. The repair itself depends on the option you choose, a spot repair can often be done in a day, while a reroute or repipe takes longer. We give you a realistic timeline once we have located the leak.
What areas do you serve?
Clinton is our base, plus Elk City, Weatherford, Cordell, Thomas, Arapaho, and the surrounding Western Oklahoma communities.
Get it looked at before it grows. Call CMD Plumbing at (580) 330-0960.